Cooling Pad

EcoOne S‐Type :
EcoOne S‐Type is Cooling Pad system for effective Energy Saving solution reducing the tem¬perature of air that cools the condenser coil in Air Conditioning unit. 

After installation EcoOne S‐Type to the condenser, the outside air stream passes through a wetted surface pad before entering the con¬densing unit. Then heat from the outside air is absorbed by water evapora¬tion thus cooling the air stream.  

The lower temperature air allows the condenser to operate at a lower temperature and pressure.  The reduced pressure allows the compressor to pump additional refrigerant and decrease the energy usage

EcoOne S‐Type : How to Save Energy ?

• Reduce temperature of Condensing unit
  EcoOne S‐Type will decrease the temperature and pressure of Condensing unit.
  The reduced pressure allows the compressor to pump additional refrigerant and decrease the Energy usage.
• Reduce room temperature (Increase BTU / hr)
  The more heat rejecting from condensing unit the better Air room temperature (increase Btu / hr) 
  Since the efficiency of AirCon increased, so, the thermostat temperature can be adjusted for more Energy saving.
  (1 0C increased   =   10 % Energy Saving) 
• Reduce Electricity consumption (kwh) of Compressor
  With EcoOne S‐Type operation, compressor will consume less electricity (kwh) approximately5 % ASAP.
• Prevent Dust collecting at Condensing Unit
• Saving Electricity up to 35% & short Payback Period

EcoOne S‐Type Component

1. Cellulose Pad  
2. Control Unit 
3. Water Tank 
4. Electric Line to Compressor
5. Input Water 
6. Drain Water 

 Energy Saving Cooling Pad
 EcoOne S-Type Presentation